Common Information - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

Integrated Administration

Common Information

The switch and the applications share the following information:
System numbering of extensions, trunks, and pools
System labeling — the user or other name associated with each
extension, trunk, and pool
The Coverage Group that sends its calls to the applications
The Calling Group set up for each service of the applications
Reliable Disconnect setting for loop-start trunks
The
Delay Ring and Coverage Delay Interval settings
The
Transfer Return Time and VMS Transfer Return interval
The
Set Up
You cannot program the common information until you have completed basic
setup programming for the communications system. Use SPM or the system
programming console to program the following:
Mode of operation
System numbering
System operator positions
Phantom extensions
Trunks to pools assignment
NOTE:
If you do not want all lines to have the same application services, you
must assign lines with the same services to the same pools
20-2
Capabilities