Zero Code Suppression - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

DS1 Facilities

Zero Code Suppression

Use this procedure to specify zero code suppression for the 100D module as
AMI Zero Code Suppression (AMI-ZCS) or Bipolar 8 Zero Suppression
(B82S). Your selection must match the suppression at the far end of the DS1
facility.
Summary: Zero Code Suppression
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
5-6
Zero Code Suppression
System manager
All
100D module idle
Form 3b, Incoming Trunks - DS1 Connectivity (100D
Module)
AMI-ZCS
AMI-ZCS, B8ZS
No
No
LinesTrunks
Enter Suppression
suppression
Enter
[F4] [F1] Type slot no.
Select zero code suppression
[F5]
Dial slot no.
LS/GS/DS1
select zero code
Exit Exit
[F10]
[F10]
[F3]
[F5]