Copy Line/Trunk Assignments - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

Telephones

Copy Line/Trunk Assignments

Use this procedure to copy outside line/trunk button assignments, pool dial-
out code restrictions (Hybrid/PBX only), and—for operator positions only—
Night Service information from a telephone to another telephone or block of
telephones with identical requirements.
If you are copying assignments to a block of telephones and one of the
extensions in the block is in use, the Station Busy– Pls Wait message
is shown on the display and the copy for the rest of the extensions in the
block is delayed until the busy extension becomes idle. The busy number is
not shown, but if you have a DSS attached, the LED associated with the busy
extension is on. If you exit instead of waiting for the busy extension to
become idle, the copy for the rest of the extensions is canceled; however, the
assignments that have already been copied are not canceled.
If you are copying assignments from an operator position to a block of
telephones that includes both operator and non-operator telephones, the
information is copied only to the operator positions; the non-operator positions
are not affected. Similarly, if you are copying assignments from a non-
operator position to a block of telephones that includes both operator and
non-operator telephones, the information is copied only to the non-operator
positions; the operator positions are not affected. The system provides no
error tone to signal that the copy did not work for all extensions in the block.
9-6
Copy Line/Trunk Assignments