Copy Telephone Number To Send - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

PRI Facilities

Copy Telephone Number to Send

Use this procedure to indicate whether or not the telephone number to send
to the network for calls going out over ISDN lines assigned to a B-channel
group, is copied from the number assigned to that channel.
Select "Do Not Copy Phone Number" when a telephone number to send is
assigned to each channel in the B-channel group or when no telephone
number is to be sent to the network. In the latter case, make sure that no
telephone number is assigned to each channel in the B-channel group by
using the "Telephone Number to Send" procedure.
Summary: Copy Telephone Number to Send
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
All
Not required
Form 3b, Incoming Trunks – DS1 Connectivity
Do not copy
Do not copy, copy
No
No
LinesTrunks
Dial group no.
Number
or no copy
Enter
[F4] [F6] [F2]
[F10] Specify copy or no copy
[F5] [F5] [F5]
Copy Telephone Number to Send
PRI B ChannlGrp
Enter
Exit Exit
[F4] Type group no.
Copy
Specify Copy
Exit
[F10]
8-7