Maintenance Alarms - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

Auxiliary Equipment

Maintenance Alarms

Use this procedure to identify the trunk jack that connects an external alerting
device that sounds or flashes when major maintenance problems occur.
You cannot assign the trunk identified for the maintenance alarm to a button
on any telephone or as a Remote Access trunk, and you cannot use its jack to
connect a loudspeaker paging system or Music-on-Hold.
Summary: Maintenance Alarms
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
All - but in Hybrid/PBX mode, the trunk designated for
the maintenance alarm cannot be assigned to a trunk
pool.
System idle
Form 2c, System Numbering – Trunk Jacks
Not Applicable
Trunk number
No
No
AuxEquip MaintAlarms
Enter Exit
[F9] [F4] Type trunk no.
[ F 5 ]
Dial trunk no.
Exit
[F10]
Maintenance Alarms
[F5]
10-7