Single Renumbering - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

System Renumbering

Single Renumbering

Use this procedure to assign a specified extension number to a telephone,
accessory, line, pool (Hybrid/PBX only), calling group, paging group, or Listed
Directory Number. Single renumbering is also used for Remote Access, Park,
Idle Line Access (Key and Behind Switch only), and Automatic Route
Selection (Hybrid/PBX only).
When required, this procedure should be performed immediately following the
selection of a system numbering plan.
CAUTION:
Select Exit on the console, [F5] on the PC, after renumbering
extensions. If you press Home, extensions may remain in the forced
idle condition (indicated when the LED next to each DSS button is
on). To restore extensions to their normal operating state, restart the
system.
Single Renumbering
2-5