General Feature Use and Telephone Programming
Programming Methods
Telephones can be programmed by dialing programming codes or, on MLX
display phones, selecting features from the display. An analog multiline
telephone cannot be programmed by selecting features from the display.
To program a telephone, first enter programming mode:
On analog multiline telephones, slide the Test/Program (T/P) switch on
the side of the telephone to P, or lift the handset, or press
Speakerphone and dial #00.
On MLX-10 telephones, press the Feature button and dial
On MLX display telephones, use the same procedures as the MLX-10
or enter programming mode by selecting Ext Program from the
menu screen on the display.
See the appropriate user or operator guide for more information.
NOTE:
Features can also be programmed onto individual telephones through
Centralized Telephone Programming. The steps for using programming
codes vary depending on the telephone. Tables C-2 through C-4 list the
basic steps for programming each telephone type.
C-10
Telephone Programming