Remote Access With Barrier Codes - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

System Features

Remote Access with Barrier Codes

Use this procedure to change the class of restriction for individual Remote
Access barrier codes. The class of restriction assigned to each barrier code
allows or denies the use of the following system features:
NOTE:
If barrier code requirements have not been established or have been
removed for Remote Access users, do not use this procedure; use
"Remote Access without Barrier Codes."
Restriction – determines whether Remote Access users can make local
and/or toll calls; the following settings are included:
— unrestricted
— toll restricted
— outward restricted
ARS Facility Restriction Level (Hybrid/PBX only) – allows or restricts
users from using outgoing trunks by assigning a facility restriction level
from 0 through 6. (The value assigned is the opposite from the FRL
assigned to the ARS route, where a value of 0 is the most, and a value
of 6 is the least restrictive.)
Allowed List Assignment – assigns Allowed Lists and is used when
Remote Access users are restricted from making local or toll calls.
Disallowed List Assignment – assigns Disallowed Lists and is used
when Remote Access users are not restricted from making local or toll
calls.
A maximum of eight Allowed or Disallowed Lists can be assigned to each
barrier code. Class of restriction settings apply to individual barrier codes.
Remote Access with Barrier Codes
14-35