12-36 WS2000 Wireless Switch System Reference Guide
This screen shows the subnets, their IP addresses, and the network interfaces (the 10/100BaseT ports and
the WLANs) that are currently associated with each subnet. Only the first subnet is initially enabled, so Leo
clicks on the check boxes to the left of
to record his changes.
Next Leo needs to configure each of the subnets. He clicks the toggle symbol to the left of LAN in the left
menu to expand it.
12.19.1 Configuring the Engineering LAN
Leo selects
Subnet1
SN, to make it easier to recognize this subnet throughout the WS 2000 interface.
Subnet2
from the choices under the LAN heading. He enters a new name for the subnet,
and
Subnet3
to enable them. He clicks the
Apply
button
Eng-