Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual page 136

6-10 WS2000 Wireless Switch System Reference Guide
2. To set a group as a group of Guest users, click the check-box in the
field.
3. To enable a group access to a particular VLAN, enter the ID in the
4. To restrict access to set times, enter the appropriate time values in "hhmm" (24 hours) format. Enter the
access start time and end time in the
5. To restrict access to set days in a week, select the appropriate week days from a dialog box that appears
when the Day Access
6. Click Apply
6.2.4.2 Deleting Groups
To remove a group, select that group from the table and click the
appear when you apply the change if there are users still assigned to the group. You can then remove the
group from each user or add the group back to the group list.
6.2.4.3 Adding Users
The Users table displays the entire list of users. Up to 100 users can be entered here. The users are listed in
the order that they are added. Though users can be added and deleted, there is no capability at present to
edit the name of a group.
1. To add a new user, click the
2. In the new line, type a
3. Click the Password
to return to the User Database screen.
4. Click the Guest
enabled.
a. Click the
access the network.
b. Click the
cannot access the network.
5. Click the List of Groups
must belong to at least one group for them to have access to the switch. When a User ID is of the type
Guest, this list will display a list of Guest User Groups.
• To add the user to a group, select the group in the
button.
• To remove the user from a group, select the group in the
Delete->
Click OK when you are done.
6. Click Apply
Start Time
field is clicked.
to save the changes.
Add button at the bottom of the Users area.
User ID (username).
cell. A small window will appear. Enter a password for the user and then click
check box to make a User ID as a guest user. The
Start Date cell. A dialog box appears where you can enter the date from when the user can
Expiry Date cell. A dialog box appears where you can enter the date after which the user
cell. A new screen appears that lets you associate groups with the user. A user
button.
to save your changes.
Guest column, next to the Groups
VLAN ID
and End Time fields respectively.
Del (Delete) key. A warning message will
Start Date
Available list (on the right) and click the
Assigned list (on the left) and click the
field for the group.
OK
and Expiry Date fields are
<-Add