Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual page 514

13-240 WS2000 Wireless Switch System Reference Guide
Example:
admin(network.wids)>
admin(network.wids)>
admin(network.wids)>
admin(network.wids)>
admin(network.wids)>
admin(network.wids)>
admin(network.wids)>
switch
filter-
<violation
-type>
ageout
set mode enable
set detect-window 25
set anomaly-detect mode all enable
set anomaly-detect filter-ageout all 120
set excess-op threshold mu all 80
set excess-op filter-ageout all 80
show wids
Sets the switch violation <violation-type>
<violati <thres
on-type> hold>
threshold value to <threshold> (
seconds. <violation-type> can be:
•
all
•
probe-req
•
auth-assoc-req
authorization and authentication requests
•
deauth-deassoc-req
deauthorization and deassociation frames
•
auth-fails
authentication servers.
•
crypto-replay-fails
CCMP IV replay check failures
•
80211-replay-fails
replay check failures
•
decrypt-fails
failures
•
eap-starts
frames
Sets the filter ageout value for the excess
<filter-
ageout>
operations as set in <violation-type>
<violation-type> can be:
•
all
•
probe-req
•
auth-assoc-req
authorization and authentication requests
•
deauth-deassoc-req
deauthorization and deassociation frames
•
auth-fails
authentication servers.
•
crypto-replay-fails
CCMP IV replay check failures
•
80211-replay-fails
replay check failures
•
decrypt-fails
failures
•
eap-starts
frames.
0-65535
- all the excess operations
- excess probe requests
- excess 802.11
- excess 802.11
- excess failures reported by
- excess TKIP/
- excess 802.11
- excess decryption
- excess EAP (802.11) start
- all the excess operations
- excess probe requests
- excess 802.11
- excess 802.11
- excess failures reported by
- excess TKIP/
- excess 802.11
- excess decryption
- excess EAP (802.11) start
)