The Ip Address Plan - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

Clarissa clicks the
Clarissa leaves the rest of the System Configuration screens for now, moves to the left menu, and clicks on
Network Configuration

12.3.3 The IP Address Plan

Subnets can be renamed, assigned an IP address, and have ports associated with them. Clarissa needs to
plan how she is going to assign IP addresses to the subnets and the devices on them.
Clarissa only has one IP address from corporate for this store. She will use network address translation (NAT)
for all of the devices, making request from those devices look to the outside world as if they came from the
single static IP address that she has. For the devices, she plans to use IP numbers from the range 192.168.*.*,
because IP addresses in that range are designated for internal use only.
She will assign them as follows:
Subnet
192.168.0.***
192.168.1.***
192.168.2.***
And for each subnet:
192.168.**.1
192.168.**.2 to 192.168.**.10
192.168.**.11 to 192.168.**.254
WIth this plan, she can begin to configure the individual subnets.
Apply button to save her changes.
so that she can begin to define the subnets.
IP Address Range
POS subnet
Printer subnet
Cafe subnet
The WS 2000 address on that subnet
Devices with static IP addresses
Devices with DHCP-supplied IP addresses
12-7
WS 2000 Use Cases