Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual page 440

13-166 WS2000 Wireless Switch System Reference Guide
interval
ccmp key
type
phrase
rotate-
mode
interval
mixed-
mode
preauth
opp-pmk
wep- index
mcm
key
Example:
admin(network.wlan)>set name 1 store
admin(network.wlan)>set name 2 backoff
admin(network.wlan)>set auth 1 kerberos
Kerberos requires WEP 104 or Keyguard. The encryption type has been changed to
W
EP104.
admin(network.wlan)>set no-mu-mu 1 enable
admin(network.wlan)>show wlan 1
wlan name
<idx> <inter
val>
<idx> <key>
/
<idx>
phrase
key
<idx> <phras
e>
/
<idx>
enable
disabl
e
<idx> <inter
val>
/
<idx>
enable
disabl
e
/
<idx>
enable
disabl
e
/
<idx>
enable
disabl
e
<idx> <kidx>
<idx> <kidx> <key>
: store
Sets the broadcast key rotation interval to
<interval> seconds ( –
300 604800
<idx>.
Sets the CCMP key to <key> (1–64 hex digits)
for WLAN <idx>. Must be specified when type
parameter is set to key.
Sets the CCMP key type to phrase or key for
WLAN <idx>.
Sets the CCMP ASCII pass phrase for WLAN
<idx> to <phrase> (8–63 characters). Must be
specified when type parameter is set to
phrase.
Enables or disables the broadcast key rotation
for WLAN <idx>.
Sets the broadcast key rotation interval for
WLAN <idx> to <interval> (
seconds.
Enables or disables mixed mode (allowing
WPA-TKIP clients) for WLAN <idx>.
Enables or disables pre-authentication (fast
roaming) for WLAN <idx>.
Enables or disables opportunistic PMK
caching (fast roaming) for WLAN <idx>.
Note: Note: The WEP authentication mechanism
saves up to four different keys (one for each
WLAN). It is not requirement to set all keys, but you
must associate a WLAN with the appropriate key.
Selects the WEP/KeyGuard key (from one of
the four potential values of <kidx> (
WLAN <idx>.
Sets the WEP/KeyGuard key for key index
<kidx> ( – ) for WLAN <idx> to <key> 1 to 26
1 4
(hex digits).
) for WLAN
– )
300 604800
– ) for
1 4