Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual page 417

Wireless switch
Hide thumbs Also See for WS2000 - Wireless Switch - Network Management Device:
Table of Contents

Advertisement

remgw
<name>
<remgw>
authalgo
<name>
<auth
algo>
authkey
<name>
IN
enctype
<name>
<enc
type>
encalgo
<name>
<enc
algo>
espauth
<name>
MD5
algo
SHA1
enckey
<name>
IN
OUT
espauth
<name>
IN
key
OUT
spi
<name>
AUTH
ESP
localgw
<name>
<ip>
/
<authkey>
OUT
/
/
<enckey>
/
<esp
authkey>
/
/
<spi>
IN
OUT
Command Line Interface Reference
Sets the Remote IP gateway for SPD
<name> to be <remgw> (a.b.c.d).
Set this value to 0.0.0.0 to support
tunneling to VPN peer which is a DHCP
client.
Sets the authentication algorithm for SPD
<name> to <authalgo> (one of
or
).
SHA1
Sets the AH authentication key (if SPD type
is Manual) for tunnel <name> with the
direction set to
or
, and the manual
IN
OUT
authentication key set to <authkey>. (The
key size is 32 hex characters for MD5, and
40 hex characters for SHA1).
Sets the Encryption type for SPD <name> to
<enctype> (one of
,
None
ESP
).
AUTH
Sets the Encryption Algorithm for SPD
<name> to <encalgo> (one of
,
, or
AES128
AES192
AES256
Sets ESP Authentication Algorithm for SPD
<name> to
or
.
MD5
SHA1
Sets the Manual Encryption Key in ASCII for
SPD <name> and direction
key <enckey>. The size of the key depends
on the encryption algorithm.
- 16 hex chars for DES
- 48 hex chars for 3DES
- 32 hex chars for AES128
- 48 hex chars for AES192
- 64 hex chars for AES256
Sets Manual ESP Authentication Key for
SPD <name> either for
IN
to <espauthkey>, an ASCII string of hex
characters. If authalgo is set to
provide 32 hex characters. If authalgo is set
to
, provide 40 hex characters.
SHA1
Sets
(bound) or
(bound) SPI for
IN
OUT
(Manual Authentication) or
<name> to <spi> (a hex value more than
0xFF).
Sets the Local WAN IP to <ip> (a.b.c.d).
The local WAN IP (local gateway) can be
set to 0.0.0.0 for a DHCP client. Any IP
address obtained from the DHCP server is
then used to initiate the VPN tunnel. The
VPN peer must set it's Remote Gateway
address to 0.0.0.0 to indicate an IP value of
ANY and shall operate as a responder only.
13-143
,
,
None
MD5
, or
ESP-
,
,
DES
3DES
).
or
to the
IN
OUT
or
direction
OUT
, the
MD5
AUTH
for SPD
ESP

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents