Subnet Stats - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

11.2.2 Subnet Stats

The Subnet Stats screens displays statistics for each of the subnets. Selecting

Subnet Stats

--> <Subnet Name>
The Information
• The HW address is the Media Access Control (MAC) address of the switch's WAN port, which is set at
the factory.
• The IP addresses displayed here for the subnet connection are set on the subnet screen
Configuration -->
The Received and Transmitted portions of the screen display statistics for the cumulative packets, bytes, and
errors received and transmitted through the WAN interface since the WAN was last enabled or the switch
was last rebooted.
Received Field
RX Packets
RX Bytes
RX Errors
RX Dropped
RX Overruns
RX Frame
Stats from the left menu displays the following screen.
portion of the Subnet Stats screen displays general information about the subnet.
WLAN --> <subnet name>).
Description
The total number of data packets received over the subnet
The total number of bytes of information received over the subnet
The total number of errors including dropped data packets, buffer overruns, and frame errors
on inbound traffic
The number of data packets that failed to reach the subnet
The total number of buffer overruns (when packets are received faster than the subnet can
handle them)
The total number of TCP/IP data frame errors received
11-5
Status & Statistics
Status & Statistics -->
(Network