Ws2000>Admin(Network.ap.default)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

WS2000>admin(network.ap.default)> set
Description:
Sets the default Access Port parameters.
Syntax:
set beacon intvl
ch-
<type
>
mode
div
<type
>
dtim
<type
>
<type
>
primary
<type
>
rate
<type
>
reg
<type
>
Sets the default beacon interval for specified radio type
<type> <interva
l>
(one of
in K-us (
/ Sets the default channel mode for radios of <type> (one of
fixed
random/
802.11a
auto
auto
Sets the default antenna diversity for radios of <type> (one
<mode>
of
802.11a
full
Sets the default DTIM period for radios of specified <type>
<period
>
(one of
number of beacons (
<bss_idx> is the index of the BSSID. If not specified for the
<bss_id <period>
x>
AP300, the default value of 1 is assumed for this parameter.
For other APs, the <period> value is used for all the BSSIDs.
Sets the default primary WLAN <widx> (1 to 4) for 802.11a
<wdix>
radios of specified <type> (one of
802.11b/g
used in the 802.11a beacon as the primary ESS.
Note: This parameter is used only for AP200 APs with 802.11a
radios.
Sets the default basic and supported rates for radios of
<basic> <support
ed>
specified <type> (one of
). <basic> and <supported> must be a comma separated
g
list of rates, such as 6,9,11,15 with no spaces. Basic rates
are a subset of supported rates. The different types of radio
support the following rates.
A - 6|9|12|18|24|36|48|54
B - 1|2|5.5|11
G - 1|2|5.5|6|9|11|12|18|24|36|48|54
Note: For a G radio, basic rates must be a subset of B Rates in
order to associate legacy B stations.
Sets the default regulatory parameters for radios of
<indoor <ch>
> <pwr>
specified type (one of
where <indoor> is one of
channel to use, and <pwr> is the power (in dB from
). Select the value of <ch> from the appropriate list.
20
802.11b ch -- 1 to 14
802.11a ch -- 36,40,44,48,52,56,60,64,149,153,157,161
Note: Note: Regulatory parameter values depend on the country
of operation and radio type. Refer to the documentation for
specific regulatory information.
Command Line Interface Reference
, , or
802.11a 802.11b 802.11b/g
– ).
50 200
, , or
802.11b 802.11b/g
.
, , or
802.11b 802.11b/g
, , or
primary secondary
, , or
802.11a 802.11b 802.11b/g
– ).
1 50
). The ESS ID configured for this WLAN will be
802.11a
,
802.11a
or
in in/out
13-33
) to <interval>
) to , , or
fixed random
) to <mode> (one of
).
) to <period>
, , or
802.11a 802.11b
, , or
802.11b 802.11b/
, or ),
802.11b 802.11b/g
; <ch> is the
to
4