Ws2000>Admin(Network.fw.submap)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

WS2000>admin(network.fw.submap)> set
Description:
Sets a default subnet access rule to allow or deny communication.
Syntax:
set default
<from> <to>
Example:
admin(network.fw.submap)>set default s2 w deny
admin(network.fw.submap)>show default s1
-----------------------------------------------------------------------------
wan
-----------------------------------------------------------------------------
allow
admin(network.fw.submap)>
/ Creates a default subnet access rule to deny or allow
deny allow
communication <from> one of the subnets (one of
= subnet2,
s2
destination (one of
= subnet4,
subnet1 subnet2
allow allow
Command Line Interface Reference
= subnet3, = subnet4) and <to> is a
s3 s4
= subnet1, = subnet2,
s1 s2
= the WAN).
w
subnet3
allow
13-87
= subnet1,
s1
= subnet3,
s3 s4
subnet4
deny