Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual page 308

13-34 WS2000 Wireless Switch System Reference Guide
rts
<type
>
short-
<type
>
pre
sensor-
<loc>
img
ap4131-
<loc>
img
ap4121-
<loc>
img
Example:
admin(network.ap.default)>set ch_mode 802.11a fixed
admin(network.ap.default)>set dtim 802.11a 10
admin(network.ap.default)>set short
admin(network.ap.default)>show default 802.11a
ap indoor use
ap channel
ap channel mode
ap radio power
power to antenna
ap diversity
basic rates
supported rates
rts threshold
beacon interval
dtim period
short preamble
security beacon (hide ess)
primary wlan index
admin(network.ap.default)>
Related Commands:
show default
Sets the default RTS threshold for radios of specified
<bytes>
<type> (one of
<bytes> (e.g., 2341).
/ By default, enables or disables the short preamble mode for
enable
radios of specified <type> (one of
disable
802.11b/g
Sets the default location of the sensor image. Location is
specified in the <loc> parameter.
Sets the default location of the AP 4131 image. Select from
cf
Sets the default location of the AP 4121 image. Select from
cf
: indoor/outdoor
: 149
: fixed
: 4 dB
: 3 mW
: full
: 6
: 6 9 12 18 24 36 48 54
: 2341
: 100
: 10
: disable
: disable
: wlan1
Displays the default AP settings for a particular radio type.
,
802.11a 802.11b
).
or .
def
or .
def
802.11b/g
enable
, or ) to
802.11b/g
, , or
802.11a 802.11b