Radio Settings - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

5-24 WS2000 Wireless Switch System Reference Guide
2. Select the Access Port to examine or modify.
When the Access Port Name menu item is selected, the following screen appears:
The advanced Access Port settings are found at the bottom and right of the screen. For most installations,
the default settings for the advanced settings are appropriate.

5.6.1 Radio Settings

Placement
Channel
Power Level
MU dB Power
Level
Adjustment
Set Rates
Select either Indoors or Outdoors
selection available for several of the other advanced settings.
Select a channel number from the
communicate with associated MUs. (The available channels vary depending on the location
setting of the switch.)
Select a power level from the
communications between the Access Port and the MUs.
This is a Motorola specific feature. This value indicates the amount of power in dBm that the
MU should reduce its Tx power by with respect to the Tx power of the AP. This feature is used
to reduce the amount of radio noise in the environment for better reception.
Click the Set Rates button to open a sub-screen where the default Basic Rates and Supported
Rates for 802.11b/g Access Ports can be set.
A list of available Basic and Supported rates for the radio are listed in two columns with
checkboxes next to each rate. Selecting a rate as a
as a Supported Rate and disables the option in the Supported Rates column.
from the Placement pop-up menu. The setting will affect the
Channel drop-down menu on which the Access Port should
Power Level drop-down menu that will be used for radio
Basic Rate automatically selects that rate