Ws2000>Admin(Network.ap.default)> Show - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

13-36 WS2000 Wireless Switch System Reference Guide
WS2000>admin(network.ap.default)> show
Description:
Shows the default Access Port parameters for a particular radio type.
Syntax:
show default
img-
location
Example:
admin(network.ap.default)>set ch_mode 802.11a fixed
admin(network.ap.default)>set dtim 802.11a 10
admin(network.ap.default)>set short 802.11b/g enable
admin(network.ap.default)>show default 802.11a
ap indoor use
ap channel
ap channel mode
ap radio power
power to antenna
ap diversity
basic rates
supported rates
rts threshold
beacon interval
dtim period
short preamble
security beacon (hide ess)
primary wlan index
admin(network.ap.default)>show img-location
Sensor Image Location
Access Point 4131 Image Location
Access Point 4121 Image Location
Related Commands:
set Sets the default parameters for the specified radio type.
Shows the default Access Port parameters.
Shows the Sensor/Access Port image locations.
: indoor/outdoor
: 149
: fixed
: 4 dB
: 3 mW
: full
: 6
: 6 9 12 18 24 36 48 54
: 2341
: 100
: 10
: disable
: disable
: wlan1
: def
: def
: def