Confirm Firewall Configuration - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

12-42 WS2000 Wireless Switch System Reference Guide
the pull-down menus to the right of each IP number. As he does so, a 1 to Many Mappings button appears
to the right of the pull-down menus, in the Outbound Mappings column.
Leo clicks any of the NAT Ranges button to the right of the IP addresses. The 1 to Many Outbound Mappings
window displays. Leo uses the pull-down menu to set the outbound IP address for each subnet. These are
the same as the inbound IP addresses that he specified in the WAN configuration screen.
He clicks the Ok button to save his entries, then clicks the Apply button in the NAT screen.
The next step is to configure the firewall.

12.22 Confirm Firewall Configuration

After setting the NAT ranges, Leo selects Firewall under WAN in the left menu. The WS 2000 displays a
series of Configurable Firewall Filters, all of which are currently enabled.