Network Ap Commands; Ws2000>Admin(Network)> Ap - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

13.3 Network AP Commands

WS2000>admin(network)> ap
Description:
Displays the Access Port submenu. The functionality provided by this menu is supplied by various screen
under the Wireless menu item of the Web interface. The items available under this command are shown
below.
add
delete
forget
list
remap
set
show
copydefaults
default
revert
reset
test
selfheal
denyap
smartscan
mesh
save
quit
..
/
Adds entries to the Access Port adoption list.
Deletes entries from the Access Port adoption lists.
Forgets AP parameters
Lists entries in the Access Port adoption list.
Remaps channels for the AP in auto mode.
Sets Access Port parameters.
Shows Access Port parameters.
Copies default AP settings to a connected AP.
Goes to the default submenu.
Reverts AP to Access Point (AP4131 or AP4121)
Resets an Access Port.
Goes to the test submenu.
Goes to the Self-heal submenu
Goes to the Deny AP submenu
Goes to the Smart scan submenu
Goes to the Mesh submenu
Saves the configuration to system flash.
Quits the CLI.
Goes to the parent menu.
Goes to the root menu.
Command Line Interface Reference
13-19