Ws2000>Admin(Network.wlan.hotspot)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

WS2000>admin(network.wlan.hotspot)> set
Description:
Sets the different Hotspot parameters.
Syntax
set mode
page-
loc
exturl
http-
mode
hotspot-
session-
timeout
Example:
admin(network.wlan.hotspot)>
WLAN 1
Hotspot Mode
Hotspot Page Location
External Login URL
External Welcome URL
External Fail URL
Http Mode
admin(network.wlan.hotspot)>
admin(network.wlan.hotspot)>
admin(network.wlan.hotspot)>
login.htm
admin(network.wlan.hotspot)>
welcome.htm
<idx> enable/
disable
<idx> <page-loc>
<idx> <page>
<idx> <http-
mode>
<hotspot-
session-
timeout>
show hotspot 1
set mode 1 enable
set page-loc 1 url
set exturl 1 login //192.168.1.10/wlan1/hotspt/
set exturl 1 welcome //192.168.1.10/wlan1/hotspt/
Enables or disables hotspot for a WLAN with the index
value <idx> ( ).
1-8
Sets the location of the welcome page for Hotspot for a
WLAN with the index <idx> (
one of ,
default cf
, the default pages are shown. When <page-
default
loc> is , the pages for login, welcome, and fail are
cf
stored on the CF card and are displayed from there.
When <page-loc> is
a URL. The URL information is provided through the
command.
set exturl
Sets the URL locations for the hotspot login, welcome,
<url>
and fail pages for a WLAN with the index value <idx>
( ). <page> should be one of
1-8
and indicates the page type. <url> is the fully
fail
qualified path to the page indicated by the <page>
value.
Sets the HTTP mode for the hotspot for the WLAN with
index <idx>. <http-mode> can be one of
. HTTP indicates that connections to the hotspot
https
does not use security. HTTPS indicates use of security.
Sets the timeout value for the hotspot to <hotspot-
session-timeout> minutes. This value is global and is
applicable to all WLANs.
: disable
: default
:
:
:
: https
Command Line Interface Reference
). <page-loc> can be
1-8
, . When <page-loc> is
url
, the pages are displayed from
url
login, welcome,
http
13-203
or
or