Ws2000>Admin(Network.ap)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

WS2000>admin(network.ap)> set
Description:
Sets Access Port parameters.
Syntax:
set beacon
ch_mode
div
dtim
loc
name
primary
rate
intvl
<idx>
/
<idx>
fixed
random/
auto
<idx> <mode>
<idx> <period>
<idx> <bss_idx> <period>
<idx> <loc>
<idx> <name>
<idx> <widx>
<idx> <basic>
Command Line Interface Reference
Sets the beacon interval for Access Port
<interval>
<idx> ( –
1 12
Sets the channel mode for Access Port
<idx> to
fixed
values can be between 1 and 12.
Sets the default antenna diversity to
<mode> (one of
secondary
Sets the DTIM period for Access Port <idx>
to <period> (number of beacons from
<bss_idx> is the index of the BSSID. If not
specified for the AP300, the default value of
1 is assumed for this parameter. For other
APs, the <period> value is used for all the
BSSIDs.
Sets Access Port <idx> location description
to <loc> (1–13 characters).
Sets Access Port <idx> name to <name> (1–
13 characters).
Sets the primary WLAN <widx> (the WLAN
index from 1 to 4) for 802.11a radio
associated with Access Port <idx>. The ESS
ID configured for this WLAN will be used in
the 802.11a beacon as the primary ESS.
Note: Note: This parameter is used only for
AP200 APs with 802.11a radios
Sets Access Port <idx> basic and supported
<supported>
rates. <basic> and <supported> must be
comma-separated lists of rates, such as
6,9,11,15 with no spaces. Basic rates are a
subset of supported rates. The different
types of radio support the following rates.
A - 6|9|12|18|24|36|48|54
B - 1|2|5.5|11
G - 1|2|5.5|6|9|11|12|18|24|36|48|54
Note: Note: For a G radio, basic rates must be a
subset of B Rates in order to associate legacy B
stations.
) to <interval> in K-us ( –
50
, or . <idx>
random auto
, , or
full primary
).
1
13-27
).
200
– ).
50