Network Ap Default Commands; Ws2000>Admin(Network.ap)> Default - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual
Wireless switch
Hide thumbs
Also See for WS2000 - Wireless Switch - Network Management Device:
- Cli reference manual (452 pages) ,
- System reference manual (362 pages) ,
- Configuration manual (19 pages)
Table of Contents
Advertisement
13-32 WS2000 Wireless Switch System Reference Guide
13.4 Network AP Default Commands
WS2000>admin(network.ap)> default
Description:
Displays the default Access Port (AP) submenu. The items available under this command are shown below.
set
loadfromcf
show
save
quit
..
/
The items in this menu are available in the Web interface under the three default Access Port screens (one
for each radio type) within the Wireless menu area.
Sets default Access Port parameters.
Loads the configured images from the CF card immediately
Shows default Access Port parameters.
Saves the configuration to system flash.
Quits the CLI.
Goes to the parent menu.
Goes to the root menu.
Hide quick links:
Advertisement
Table of Contents
