Network Wips Command; Ws2000>Admin(Network)> Wips - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

13.43 Network WIPS Command

WS2000>admin(network)> wips
Description:
Displays the Wireless Intrusion Protection System (WIPS) submenu. The items available under this command
are shown below.
set Sets WIPS parameters.
show Displays WIPS parameters
list Lists the APs and Sensors discovered.
convert Converts APs to dedicated WIPS sensors
revert Revers dedicated WIPS sensors to APs
update Sends WIPS configuration to the sensors
defaults Goes to the Defaults submenu.
save Saves the configuration to system flash.
quit Quits the CLI.
.. Goes to the parent menu.
/ Goes to the root menu.
Command Line Interface Reference
13-227