Configuring The Wan Interface - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

12-12 WS2000 Wireless Switch System Reference Guide
Clarissa clicks the Ok button in the Advanced DHCP Server window, then on the Apply button in the subnet
screen to save her choices. The subnets are now configured.
Next Clarissa configures the WAN interface.

12.7 Configuring the WAN Interface

Now Clarissa selects the WAN node in the left menu. Here she enters the static IP address assigned to this
store by CCC corporate. She also enters the other information supplied to her by corporate: the gateway IP
address, the subnet mask, and the DNS server IP addresses. She is connecting by a DSL modem, but because
she has a static IP address, her Internet service provider (ISP) does not require PPP-over-Ethernet connection
information. If her ISP required PPPoE account information, she would have to enter that information in the
PPP-over-Ethernet section of the screen.