Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual page 240

12-28 WS2000 Wireless Switch System Reference Guide
To set the subnet access for a pair of subnets, she clicks the square for traffic from one subnet to another
and then uses the detail section, which appears below, to determine the rules for traffic between those two
subnets.
She allows the Cafe subnet to have full access to the WAN. For the Cafe subnet to or from any other internal
subnet, she selects the appropriate square, then uses to the detail box below to "Deny" all protocols.
For the POS subnet and the Printer subnet, she selects "Allow" all protocols when going to the WAN, the
POS subnet, and the Printer subnet.
After specifying all of the subnet access rules, she clicks the Apply button to save her changes.