Ws2000>Admin(Network.wan.vpn)> Add - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

WS2000>admin(network.wan.vpn)> add
Description:
Adds an security policy database (SPD) entry.
Syntax:
add
<name> <LSubnet> <LWanIP> <RSubnetIP> <RSubnetMask> <RGatewayIP>
Example:
admin(network.wan.vpn)>add Bob 1 209.239.160.55 206.107.22.45 255.255.255.224
206.107.22.2
If tunnel type is Manual, proper SPI values and Keys must be configured after
adding the tunnel
admin(network.wan.vpn)>list
-----------------------------------------------------------------------------
Tunnel Name
-----------------------------------------------------------------------------
Eng2EngAnnex
Bob
admin(network.wan.vpn)>
Creates a tunnel named <name> (1 to 13 characters) to gain access to local subnet
<LSubnet> ( , , , ), through local WAN IP <LWanIP> from the remote subnet with
1 2 3 4
address <RSubnetIP> and subnet mask <RSubnetMask> using the remote gateway
<RGatewayIP>.
The local WAN IP can be set to 0.0.0.0 for a DHCP client. Any IP address obtained from the
DHCP server is then used to initiate the VPN tunnel. The VPN peer must set it's Remote
Gateway address to 0.0.0.0 to indicate an IP value of ANY and shall operate as a responder
only.
Type Remote IP/Mask
Manual 192.168.32.2/24
Manual 206.107.22.45/27
Command Line Interface Reference
Remote Gateway Local WAN IP
192.168.33.1 192.168.24.198
206.107.22.2 209.239.160.55
13-137
Subnet
1
1