Ws2000>Admin(Network.lan)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual
Wireless switch
Hide thumbs
Also See for WS2000 - Wireless Switch - Network Management Device:
- Cli reference manual (452 pages) ,
- System reference manual (362 pages) ,
- Configuration manual (19 pages)
Table of Contents
Advertisement
13-90 WS2000 Wireless Switch System Reference Guide
WS2000>admin(network.lan)> set
Description:
Sets the LAN parameters for the four subnets.
Syntax:
set
ipadr
mask
dgw
mode
name
port
wlan
Example:
admin(network.lan)>show lan 1
subnet name
subnet interface
ip address
network mask
ports
wlans
admin(network.lan)>set name 1 NewName
admin(network.lan)>set port 4 none
admin(network.lan)>set wlan 2 s1
admin(network.lan)>show lan 1
subnet name
subnet interface
ip address
network mask
ports
wlans
admin(network.lan)>
Related Commands:
show lan
Shows the current settings for the specified subnet (LAN).
Sets the IP address of subnet <idx> (
<idx>
<IPaddr>
<IPaddr> in the form a.b.c.d.
Sets the netmask of subnet <idx> (
<idx>
<IPmask>
<IPmask> in the form a.b.c.d.
Sets the default gateway for the subnet <idx> (
<idx>
<a.b.c.d>
<a.b.c.d>.
/
Enables or disables the subnet identified by <idx> (
<idx>
enable
disable
Sets the name of the subnet to <name> (can be up to 7
<idx>
<name>
characters).
Assigns port <port#>(
<port#
<subnet>
>
s4
Assigns WLAN number <wlan#> to the subnet indicated by (
<wlan#
<subnet>
>
s2
–
) to the subnet indicated by (
1
6
). Unassigns a port with <subnet> = none.
,
,
). Unassigns a WLAN with <subnet> = none.
s3
s4
: Subnet1
: enable
: 192.168.0.1
: 255.255.255.0
: port1 port2 port3 port4 port5 port6
: wlan1
: NewName
: enable
: 192.168.0.1
: 255.255.255.0
: port1 port2 port3 port5 port6
: wlan1 wlan2
–
) to the IP address
1
4
–
) to IP address mask
1
4
) to the IP
1-4
–
).
1
4
,
,
s1
s2
s1
,
s3
,
Hide quick links:
Advertisement
Table of Contents
