Chassis Intrusion Header; Hdd Active Led Header; Ipmb; Hsbp - Intel S3210SHLX - Entry Server Board Motherboard Specification

Intel® Server Boards S3200SH/S3210SH TPS
Figure 34. Intel
6.7.2

Chassis Intrusion Header

A 1x2 pin header (J6J2) is used in chassis that support a chassis intrusion switch. This header
is monitored by the Intel
6.7.3

HDD Active LED Header

There is a 1x2 pin header for HDD LED connection. This jumper is reserved for PCI add-in
cards that support the SCSI or SATA interface with an external HDD LED activity cable.
6.7.4

IPMB

There is a 4-pin IPMB connector jumper. This jumper is reserved for connecting add in server
management module.
6.7.5

HSBP

There is a 4-pin HSBP connector jumper. This jumper is reserved for connecting to the Intel
Entry Server Chassis SC5299-E hot-swap backplane.
6.7.6

SATA SGPIO

There is a 4-pin SATA SGPIO connector jumper. This jumper is reserved for connecting to the
®
Intel Entry Server Chassis SC5299-E SATA hot-swap backplane.
92
®
Server Board S3200SH-V Back Panel I/O Connectors
®
ICH9R. The pin-out definition for this header is shown below.

Table 62. Chassis Intrusion Header (J1B2) Pin-out

Pin
1
2

Table 63. HDD LED Header (J1J1) Pin-out

Pin
1
2
Connectors and Jumper Blocks
TBD
Signal Name
FP_INTRUDER_HDR_P1
FP_INTRUDER_HDR_N
Signal Name
FM_SIO_SCSI_ACT_N
TP_SCSI_ACT_PIN2
®
Revision 1.3