Ac Line Fast Transient (Eft) Specification; Product Regulatory Compliance; Product Safety Compliance; Table 72. Ac Line Surge Transient Performance - Intel S3210SHLX - Entry Server Board Motherboard Specification

Intel® Server Boards S3200SH/S3210SH TPS
Duration Surge
Continuous 10%
0 to ½ AC 30%
cycle
8.2.4

AC Line Fast Transient (EFT) Specification

The power supply shall meet the EN61000-4-5 directive and any additional requirements in
IEC1000-4-5:1995 and the Level 3 requirements for surge-withstand capability, with the
following conditions and exceptions:
•
These input transients must not cause any out-of-regulation conditions, such as
overshoot and undershoot, nor must it cause any nuisance trips for any of the power
supply protection circuits.
•
The surge-withstand test must not produce damage to the power supply.
•
The supply must meet surge-withstand test conditions under maximum and minimum
DC-output load conditions.
8.3

Product Regulatory Compliance

Intended Application – This product was evaluated as Information Technology Equipment
(ITE), which may be installed in offices, schools, computer rooms, and similar commercial type
locations. The suitability of this product for other product categories and environments (such as:
medical, industrial, telecommunications, NEBS, residential, alarm systems, test equipment,
etc.), other than an ITE application, may require further evaluation. This is an FCC Class A
device. Integration of it into a Class B chassis does not result in a Class B device.
8.3.1

Product Safety Compliance

The server board complies with the following safety requirements:
•
UL60950 – CSA 60950(USA / Canada)
•
EN60950 (Europe)
•
IEC60950 (International)
•
CB Certificate and Report, IEC60950 (report to include all country national deviations)
•
CE - Low Voltage Directive 73/23/EEE (Europe)
100

Table 72. AC Line Surge Transient Performance

AC Line Surge
Operating AC Voltage
Nominal AC Voltages
Mid-point of nominal AC
Voltages
Design and Environmental Specifications
Line
Frequency
50/60Hz No loss of function or performance.
50/60Hz No loss of function or performance.
Performance Criteria
Revision 1.3