Ipmb Connector; Fan Connectors; System Fan Connectors; Table 45. Chassis Intrusion Header Pin-Out (Chas Intr) - Intel S2600CO Family Technical Product Specification

On-board Connector/Header Overview

Table 45. Chassis Intrusion Header Pin-out (CHAS INTR)

Table 46. Chassis Instrusion Header State Description

Header state
PINS 1 and 2 CLOSED
PINS 1 and 2 OPEN
8.4.6

IPMB Connector

8.5

Fan Connectors

The server board provides support for nine fans. Seven of them are system cooling fans; two of
them are CPU fans.
8.5.1

System FAN Connectors

The server board provides support for seven system cooling fans. Each connector is monitored
and controlled by on-board platform management. On the server board, each system fan
connector is labeled SYS_FAN_#, where # = 1 thru 7. The six system cooling fan connectors
near the front edge of the board (SYS_FAN_1 to SYS_FAN_6 are 6-Pin connectors; the one
system cooling fan near rear edge of the board is a 4-Pin connectors (SYS_FAN_7). Following
table provides the pin-out for all system fan connectors.

Table 48. 6-pin System FAN Connector Pin-out (SYS_FAN_1 to SYS_FAN_6)

Table 49. 4-pin System FAN Connector Pin-out (SYS_FAN_7)

92
Pin Signal Description
1 FP_CHASSIS_INTRUSION
2 GND
IBMC CHASSIS_N is pulled HIGH. Chassis cover is closed.
IBMC CHASSIS_N is pulled LOW. Chassis cover is removed.

Table 47. IPMB Connector Pin-out (IPMB)

Pin Signal Description
1 SMB_IPMB_5VSTBY_DATA
2 GND
3 SMB_IPMB_5VSTBY_CLK
4 P5V_STBY
Pin Signal Description
1 GND
2 12V
3 TACH
4 PWM
5 PRSNT
6 FAULT
Pin Signal Description
1 GND
2 12V
3 TACH
4 PWM
Intel order number G42278-002
Intel® Server Board S2600CO Family TPS
Description
Revision 1.0