Server Board Overview
•
Video
•
ServerEngines* Integrated BMC
•
External 32MB (or greater) DDR2 533MHz memory
•
VGA Video external connector
•
Peripheral Interface (PCIe* and PCI)
−
Two different PCIe* configurations on single board, dependent on board SKU
•
HDD Interface
−
Six SATA II ports, 300MB per second
•
USB
−
Two USB 2.0 ports connected to the server rear panel
−
Two USB 2.0 ports connected to headers on the server board
−
One USB 2.0 port connected to an internal vertical connector
•
LAN
−
One Gigabit Ethernet device (Tabor, MAC + PHY) connect to PCI interfaces on
the ICH9R.
−
One Gigabit Ethernet PHY (Nineveh) connected to ICH9R thru GLC/LCI
interface. (not in V board SKU)
−
Two 10/100/1000 Base-TX interfaces through RJ45 connectors with integrated
magnetics
−
Link and speed LEDs on the RJ45 connector
•
Power Supply
−
SSI EEB Power Connectors
−
On board Power generation
4
LX board SKU: One PCIe* x16 and one PCIe* x8 slot, connected to the
PCIe* ports of the MCH
LC board SKU: One PCIe* x16 and one PCIe* x8 slot, connected to the
PCIe* ports of the MCH; one PCIe* x8 slot, connected to PCIe* x4
interface of the ICH
L and V board SKUs: Two PCIe* x8 slots, one connected to the PCIe* x8
interface of the MCH and the other connected to the PCIe* x4 interface of
the ICH
VRD 11 processor core voltage
1.2V regulator for FSB VTT
1.25V regulator for MCH core and I/O
1.05V regulator for ICH9R core
1.5V regulator for the ICH9R I/O
1.8V for DDR2 and 0.9V for DDR2 termination
3.3V SB voltage regulator
1.8V AUX, 1.2V AUX, and 0.9V AUX for Integrated BMC and its DDR2
memory
Intel® Server Boards S3200SH/S3210SH TPS
Revision 1.3