Figure 23. Setup Utility - Boot Options Screen Display; Table 32. Setup Utility - Boot Options Screen Fields - Intel S3210SHLX - Entry Server Board Motherboard Specification

Intel® Server Boards S3200SH/S3210SH TPS
4.3.2.6 Boot Options Screen
The Boot Options screen displays any bootable media encountered during POST, and allows
the user to configure desired boot device.
To access this screen from the Main screen, select Boot Options.
Advance
Main
d
Boot Timeout
Boot Option #1
Boot Option #2
Boot Option #x
Boot Option Retry
Hard Disk Order
CDROM Order
Floppy Order
Network Device Order
BEV Device Order
Setup Item
Boot Timeout
Boot Option #x
Boot Option Retry
66
Security Server Management
Figure 23. Setup Utility — Boot Options Screen Display
Table 32. Setup Utility — Boot Options Screen Fields
Options
0 - 65535 The number of seconds BIOS will
pause at the end of POST to allow the
user to press the [F2] key for entering
the BIOS Setup Utility.
Valid values are 0-65535. Zero is the
default. A value of 65535 will cause the
system to go to the Boot Manager
menu and wait for user input for every
system boot.
Available boot Set system boot order by selecting the
devices. boot option for this position.
Enabled This will continually retry NON-EFI
based boot options without waiting for
Disabled
user input.
Boot Options
<0 - 65535>
<Available Boot devices>
<Available Boot devices>
<Available Boot devices>
Enabled / Disabled
Help Text
System BIOS
Boot Manager
Comments
After entering the desired
timeout, press enter to register
that timeout value to the
system. These settings are in
seconds.
Revision 1.3