Connection Type Switching; Wireless Settings - Sharp MXC301W Operation Manual

Connection Type Switching

Specify the network connection type (wired or wireless).
For wireless communication via an access point, select "Wireless (Infrastructure Mode)". (A wired connection already
being established at this time will be disabled.)
For wireless communication between devices without using an access point, select "Wired + Wireless (Access Point
Mode)".
For wired connection only (without any wireless communication), select "Wired Only".
• If "Wired + Wireless (Access Point Mode)" is selected, only the following functions and operations are available for devices
connected to the machine:
- Browsing Web pages of the machine
- Printer functions
- Scanner functions
- Remote operations
- SMB server functions
- mDNS
• This function is not available in some countries and regions.

Wireless Settings

Configure settings to connect the network using a wireless connection.
• [Configure (Access Point Mode)] key
If the [Settings] button is touched while [Connection Type Switching] is set to [Wired+Wireless (Access Point Mode)]
or [Wired Only], the Wireless Settings (Access Point Mode) screen is displayed.
• [Configure (Infrastructure Mode)] key
If [Connection Type Switching] is set to [Wireless (infrastructure mode)] and the [Settings] button is touched, the
infrastructure mode wireless setting screen is displayed.
• [Initialize] key
Touch this key to reset wireless settings to the factory default.
Configure (Access Point Mode)
SSID
Enter an SSID using up to 32 characters.
Security Type
Select a security type.
Encry.
Select an encryption type.
Security Key
Enter a security key. 5 characters or 10-digit
hexadecimal number
Show Security Key
If it is set to ON, the security key appears.
("REMOTE OPERATION OF THE MACHINE" (Page 1-22))
Device IP Address
Enter the IP address.
Channel to Be Used
Select the channel to be used in wireless LAN.
Bandwidth
Set the frequency band that is used for wireless LAN.
Sending Output
Configure the sending output.
IP Address Distribution Range Setting
Configure the range to be used the IP address and the
lease period for the IP address.
7-75
SYSTEM SETTINGS
Contents