Setting System Defaults; Setting Default Media - Xerox DocuPrint 180 Configuration Manual

Setting default media

XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
5.

5Setting system defaults

This chapter describes the process for setting defaults for print
features and system configuration. These default settings allow you
to customize the way the system accepts information from host or
network, displays information to the user, and handles print jobs
without specific overriding instructions.
Before sending print jobs to your DocuPrint NPS, you need to set
system defaults for the various document parameters associated
with print jobs. DocuPrint NPS provides the following commands for
this purpose, including:
•
Set Default Media defines the default media size, type, color,
and weight. Show Default Media lists the currently defined
default media.
•
Set Tray allows you to specify what type of media is loaded in
your printer feeder trays.
•
Set Option sets the values of various printing options. You can
view the current setting of these options with the List Options
command and print them with the Print Options command.
•
Change Imager Parameters and Change PCL Imager
Parameters adjust the imaging level of print jobs. You can show
the current values and restore the defaults.
•
Change PCL Parameters allows you to define the environment
for PCL printing.
The following sections provide the syntax and arguments for these
commands.
The Set Default Media command (administrator or operator level)
defines the default media size, type, color, and weight.
The Show Default Media command (administrator, operator, or user
level) lists the default media for the printer.
These default settings are applied to media trays by invoking the Set
Tray n Default command.
5-1