Xerox DocuPrint 180 Configuration Manual page 116

SETTING SYSTEM DEFAULTS
5-12
GreenHighlight <RGB value for green>
Refers to the RGB value for green highlight color. The default
setting is "R: 0.0, G: 0.8820001, B: 0.0."
For green highlight color to print correctly, the default RGB value
for this option should not be modified.
HeaderMedia <size:type:color:weight>
Refers to the media used for printing the header page.
•
If the size specified in the HeaderMedia differs from the first
media specified for the job, then the sequencer will attempt
to match the size of the job's first media, but match the type,
color, and weight of the HeaderMedia option.
•
If no tray is set that matches the job's first media size and
type, color, and weight of the HeaderMedia, then use the
HeaderMedia option without modification.
•
If the HeaderMedia option matches no tray setting, then use
the job's first media (without modification) for the header
media.
<size>
Indicates the size of the media.
Acceptable size values for the models 4050, 4090, 4850, or
4890 are: "USLetter," "USLegal," "A4," or "nxn,".
Acceptable custom paper sizes (nxn specified in
millimeters) range from 8 x 10" (203 x 254mm) to 8.5 x 14"
(216 x 356mm).
Acceptable size values for the models 96, 4635, or 180 are:
"USLetter," "USLegal," "USLedger," "Tabloid," "A3," "A4,"
or "nxn." Acceptable custom paper sizes (nxn specified in
millimeters) range from 7 x 10" (178 x 254mm) to 17 x 14"
(432 x 356mm).
<type>
Sets the media type. Use a text string to specify the media
type. Enter double quotation marks (" ") to leave the string
empty. Valid types for all systems include "transparency,"
"drilled."
Additional valid types for the 96, 4635 and 180 include
"precut," "drilled-precut," "#hole," and "ordered#." The
symbol # is replaced by a number to indicate either the
number of holes or the number of items in the ordered set.
<color>
Indicates the color of the media. Use a text string to specify
the color.
<weight>
Indicates the weight of the media in grams per square meter
(gsm). "0" indicates no preference.
HeapLimit <limit in MB>
Refers to the heap limit in MB. The default setting is "100."
The default value for this option should not normally be modified.
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM