Xerox DocuPrint 180 Configuration Manual page 92

STARTING AND STOPPING THE SYSTEM
IPS mode to NPS mode
3-28
5. Put the printer online at the host.
6. Start the printer at the host.
Follow these steps to switch the printer controller from IPS mode to
NPS mode:
1. Check the Control Unit Status field on the IPS Main window to
verify that the printer is Idle (not printing or receiving data).
2. Drain the printer at the host to stop the host from sending jobs
from the queue. (Follow procedures for your own host system.)
3. At the host, take the printer offline.
4. Place the cursor on the background area of the screen (not in a
window or on an icon), and click the right mouse button.
5. From the workspace pulldown menu that appears, select Start
Network Printer. A confirmation prompt window appears with
the message, "Do you really want to restart the printer?"
6. Click on Confirm on the message window.
Caution: Do not select Restart and do not turn the controller
or the printer off and on.
7. The printer controller reboots and, after a few minutes, switches
to NPS mode.
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM