Xerox DocuPrint 180 Configuration Manual page 246

USING WIZARD MODE OR UNIX SHELL
Using the UNIX shell
Mount CDROM
Mount Floppy
12-2
In most instances, you can use the UNIX shell from the background
menu instead of Wizard Mode.
You can select the shell from the background menu when UNIX
command tool is enabled during installation.
You can use any available editor (such as vi or textedit) from the
UNIX command tool.
Obtain a command tool from the background menu and enter the
UNIX superuser password. Enter mount -rF hsfs /dev/sr0 /cdrom.
(The UNIX directory /cdrom must exist before running this
command.)
Access level UNIX superuser
Syntax mount -rF hsfs /dev/sr0 /cdrom
Arguments None.
Note: This method for mounting the CDROM is not necessary for
installing fonts. The font install commands automatically mount the
CDROM.
This command mounts a DOS-formatted floppy.
Obtain a command tool from the background menu and enter the su
command, when prompted enter UNIX superuser password. Enter
mount /pcfs.
Access level UNIX superuser
Syntax mount /pcfs
mount -r /pcfs if the diskette is write-protected.
Arguments None.
Note: This method for mounting the floppy is not necessary for
installing fonts. The font install commands automatically mount the
floppy.
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM