Xerox DocuPrint 180 Configuration Manual page 180

CHECKING SYSTEM STATUS AND DISPLAYING BILLING METERS
List Executives
Display Billing Meters
Billing meters for models 96, 4635, and 180 NPS
8-4
Use the List Executives command at the Printer Controller, or at the
Client when logged on as a remote operator, to determine which
clients are connected to your DocuPrint NPS as remote operators
and to list current local sessions. Refer to "Using remote access" in
the chapter "Using the system interface" for more information.
Access level Administrator or operator
Syntax List Executives
Arguments None
Note: An asterisk indicates the client from which you issued the
command. IP addresses for all clients logged on as remote operators
are listed. If DNS is enabled on the network, host names are also
listed.
Use the Display Billing Meters command to display the available
billing meters. As the printer processes print jobs, it maintains usage
data to be displayed on the billing meters. Billing meters are numbers
(up to 8 digits) used to track printer activity, such as the number of
pages printed.
Access level Administrator or operator
Syntax Display Billing Meters <All>
Note: There are different arguments for this command depending
on the printer model you have.
Arguments <All>
Displays all the billing meters.
<none>
If no argument is entered, only billing meter A is displayed.
Billing Meter A
The total number of good prints delivered.
Billing Meter C
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM