Configuring Docuprint As A Pserver - Xerox DocuPrint 180 Configuration Manual

Configuring DocuPrint as a PSERVER

XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Table 4-1.
DocuPrint NPS as a PSERVER
8. Can send a job ticket that references
one file on the Novell file server to
which the DocuPrint NPS is
connected.
If you configure the DocuPrint NPS as a PSERVER:
1. Using PCONSOLE, define a print server with a name and
password (optional).
2. Using PCONSOLE, create a queue.
3. Using PCONSOLE, define one printer as Remote Other/
Unknown for the print server, and define the printer to service
the print queue. Printer name is not important, but it is best to
use the same name for both the printer and the queue.
4. Create a virtual printer that matches the queue name as a
default virtual printer. (This supports the use of form names that
do not match the name of a virtual printer.)
5. Create form names in PRINTDEF and create a virtual printer
with the same name as each form.
6. Optionally define a list of users to notify when you enter the
Stop Queueing command, which disables print job submission.
This list must be associated with the single printer defined
above.
7. Supply the service representative with the required installation
parameters, as identified in the checklist provided in the
DocuPrint NPS Installation Planning Guide.
In the following illustration, the queue, virtual printer, and specified
form are configured with the same name. The user sends a print job
that specifies a form named Gazette through the LPT1 port to the
Gazette queue. This job is assigned to the Gazette virtual printer.
CLIENT
WORKSTATION
DEVICE
LPT1
DOCUPRINT NPS ON A NOVELL NETWORK
Print Server and Remote Printer
differences (continued)
DocuPrint NPS as an RPRINTER
8. Cannot reference files on a Novell
file server.
NETWARE
FILE SERVER
QUEUE
GAZETTE
DOCUPRINT
VIRTUAL
PRINTER
GAZETTE
4-3