Xerox DocuPrint 180 Configuration Manual page 170

INPUT AND OUTPUT PROFILES
Create Profile
Set Profile
6-2
Use the Create Profile command to create a profile for an optional
input or output device.
Access level Administrator
Syntax Create <"Input" | "Output"> Profile <name> <P1>...<P12>
Arguments <"Input" |"Output">
Specifies whether the profile is for an input or output device.
<name>
Refers to the name (usually 6–8 characters) you apply to the
device
<P1> ... <P12>
Refers to values for the profiles obtained from your Xerox
representative or third-party vendor. These values are set in the
printer and saved in a file. The system prompts you for 12 values
for the output profile.
Use the Set Profile command to set a profile you've created for an
optional input or output device.
Access level Administrator
Syntax Set < "Input" |"Output"> Profile <name>
Arguments <"Input" | "Output">
Specifies whether the profile is for an input or output device
<name>
Refers to the name you applied to the device when you created
a profile for it.
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM