Unset Tray <N> - Xerox DocuPrint 180 Configuration Manual

SETTING SYSTEM DEFAULTS
Unset Tray <n>
5-6
Example This example sets the item at the top of feeder tray 1 to number 3 in
the current ordered set:
PS-op>set tray 1 position 3
Tray 1 set to Position 3
If you want the system to ignore a tray, use the Unset Tray command.
To restore the tray to active status, use the Set Tray command.
Access level Administrator or operator
Syntax Unset Tray <n>
Arguments <n>
Indicates the number of the paper tray.
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM