Xerox DocuPrint 180 Configuration Manual page 264

HANDLING XDOD/DIGIPATH JOBS
Removing .gfi directories
13-4
•
If you are running SunOS 4.1.x, verify that the Beame &
Whiteside NFS daemon (bwnfsd) is running for XDOD
installations prior to 4.0. To do so, obtain a command tool from
the background menu and type:
ps -axc | grep bwnfsd | grep -v grep.
– If the bwnfsd is running, a line describing the daemon is
displayed.
– If the bwnfsd is not running, restart DocuPrint, then try the
verification again. If the daemon is still not running, contact
your service representative.
If a job submitted from an XDOD client was canceled or aborted, the
partially complete .gfi directory is not automatically deleted from the
/var/spool/data/xdms directory. To remove unwanted .gfi directories:
1. In the DocuPrint Print Service window, at the PS> prompt, enter
privilege administrator.
2. Enter stop all to stop printing and queueing.
3. Obtain a command tool from the background menu.
Note: Using Wizard Mode to delete unwanted .gfi directories is
not recommended.
4. Enter cd /var/spool/data/xdms.
5. Enter pwd to verify you are in the /var/spool/data/xdms
directory.
6. Use the su command to access root.
7. Enter the superuser password.
8. Enter ls -lt to display a list of subdirectories sorted by date.
9. Enter rm -r <name>.gfi to remove each .gfi directory with a
date earlier than the current date.
10. Enter exit to exit superuser mode.
11. Select quit to close the command tool window.
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM