Xerox DocuPrint 180 Configuration Manual page 139

Set Tray <n> Tray <m>
Set Tray <n> Position <m>
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Use the Set Tray <n> Tray <m> command to set the attributes of tray
<n> the same as those for tray <m>.
Access level Administrator or operator
Syntax Set Tray <n> Tray <m>
Arguments <n> <m>
Assigns the attributes of tray <m> to tray <n>
Example This example sets the attributes of tray 1 to be the same as those of
tray 2:
PS-op>set tray 1 tray 2
Tray 1 set to match Tray 2
Note: This command is generally not required for ordered stock
applications.
Use the Set Tray <n> Position <m> command to specify the position,
in an ordered set, of the piece of stock at the top of the tray.
Before using this command ensure all trays are in the feed position.
Note: This command applies only to ordered sets on the 96, 4635,
and 180.
Access level Administrator or operator
Syntax Set Tray <n> Position <m>
Arguments <n>
Indicates the number of the paper tray. The tray must already
have paper type set to "<anything>-ordered#," where # is the
total number of items in a complete set.
<m>
Sets the item at the top of tray n to the appropriate order number
in the ordered set. The value <m> must not be greater than the
number (#) specified in the "ordered#" field of the paper type
specified for the tray.
SETTING SYSTEM DEFAULTS
5-5