Xerox DocuPrint 180 Configuration Manual page 157

Restore Default PCL Imager Parameters
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
HPGL user-defined pattern enhancement value
Indicates whether you want thickening for HPGL user-defined
patterns. The values are:
"0"=no enhancement
"1="1D overstrike (shift & OR on X axis)
"2"=2D overstrike (shift & OR on both X and Y axes)
"3"=2X scaling (double pixeling)
Bitmap font enhancement value
Indicates whether or not you want thickening for bitmap fonts.
Acceptable values are "TRUE" or "FALSE".
On the 92C, 4850, and 4890 models, the system will prompt you to
change parameters for both PCL 5e and PCL 5c.
On the 96, 4635, and 180 models, the system will prompt you to enter
the resolutions for which you want to change the parameters. When
finished with that resolution, the system asks if you want to change
another set of PCL 5e parameters.
Use the Restore Default PCL Imager Parameters command to
restore the default values of the imager parameters.
Access level Administrator
Syntax Restore Default PCL Imager Parameters
Arguments None
Example This example restores the default values of the PCL imager
parameters:
PS-admin>restore pcl default imager parameters
Do you want to restore default PCL parameters?
yes
SETTING SYSTEM DEFAULTS
5-23