Xerox DocuPrint 180 Configuration Manual page 74

USING UTILITY COMMANDS
Reinitializing Software: Option 6
2-16
D Redisplay the list of all parameters and values.
DP Display the list of parameters and values for a particular package
only.
M Modify the value of any parameter.
H Display helpful information about any parameter.
C Commit any changes made to values.
Q Quit.
The following guidelines apply:
•
You can change the value of any number of parameters, then
commit all the changes at once. The relevant parts of the
system are reconfigured when you commit the changes.
•
The display produced by the D or DP commands places an
asterisk next to values that have been changed.
•
When you enter the H or M commands, you are asked for a
parameter name. Enter the name exactly as it appears in the
list.
•
Most parameter names begin with the name of a package, and
many have multiple parts separated by periods (such as
tcpip.ftp or maint.savecore.maxcore).
•
After you have given a value for a parameter, you may be
prompted for values that are needed based on the value just
supplied.
•
Not all of the parameters are useful. Some parameters may not
have any effect unless another parameter is set to a particular
value (for example, the Novell parameters do not have any
effect unless novell.rprinter or novell.pserver is set to "Y").
Caution: Some parameters may have harmful effects if certain
steps are not taken. Read any instructions that are presented very
carefully. Note that the IOT type cannot be changed.
If something on the DocuPrint NPS system (for instance, the Job
Pool Manager database) becomes corrupted in ways that the
automatic repair software cannot detect or process, you may be able
to repair the problem by reinitializing the software.
Caution: Reinitializing the software can result in the permanent
loss of customer data such as data in the Job Pool Manager, virtual
printer definitions, option values, and so forth. Do not use the
reinitialize option without careful consideration. Try rebooting to
verify that the problem still exists before you reinitialize.
XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM