Xerox DocuPrint 180 Configuration Manual page 115

XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
fastest processing. When the specified value for the resolution
attribute is 600 dpi, the data is decomposed by the controller at
600 dpi; this provides the best quality image.
DefaultStacker <"0" | "1" | "2">
Refers to the stacker group used.
0 = top tray
1 = stacker group 1
2 = stacker group 2
The default setting is "1."
DefaultStitch <"TRUE" | "FALSE">
Refers to whether test patterns or sample documents are
stitched when the Print Test Pattern or Print Sample Document
command is entered. The default setting is "FALSE."
EarlyStaple <"TRUE" | "FALSE">
Refers to whether stapled jobs printed in ascending page order
and exceeding the stapler limit (50 sheets) are delivered early.
The default setting is "FALSE." Used only for systems with
stitchers.
ExportVPsToAppleTalk <"TRUE" | "FALSE">
Refers to whether newly created virtual printers are
automatically exported to AppleTalk for viewing in the users'
Chooser. If "TRUE", all new virtual printers will be made
available for AppleTalk. If "FALSE", the new virtual printers will
not be automatically made available. Selected virtual printers
can be exported to AppleTalk by using the Set Virtual Printer
Flags command. Refer to the Guide to Managing Print Jobs
chapter "Managing Virtual Printers."
ExtraMessage <message>
Refers to any message that appears in the middle of the header
page that prints with the job.
ForceBlackOnly <"TRUE" | "FALSE">
Refers to whether black-only printing is used with highlight color
printers. The default setting is "FALSE."
ForceHeaderAlt <"TRUE" | "FALSE">
Refers to forcing header and trailer sheets to an alternate
destination for printers with the bypass transport. The default
setting is "FALSE," meaning that the header and trailer sheets
are sent to the bypass transport. When set to "TRUE," header
and trailer pages are sent to the Stacker Group that is not the top
tray and not the bypass transport. On 4050, 4090, 4850, 4090,
92C, and 180 systems, header and trailer pages are sent to
stacker group 2. On 4635 and 96 systems header and trailer
pages are sent to stacker group 1.
ForceReport <"TRUE" | "FALSE">
Refers to whether a trailer sheet prints at the end of a job. The
default setting is "FALSE."
When the default setting is used, a trailer sheet prints only if
there are printing errors or a PostScript file writes to stdout.
SETTING SYSTEM DEFAULTS
5-11