Xerox DocuPrint 180 Configuration Manual page 119

XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
ReportSheets <format for sheets>
Refers to the format in which the number of pages per document
appears on the trailer sheet that prints at the end of a job. You
use numbers and predefined characters to indicate the format.
The predefined characters are replaced by the actual numbers
on the trailer sheet when the document is printed. The
predefined characters are as follows:
%g
Indicates that numbers appear as a string.
ReportTime <format for time in seconds>
Refers to the format in which the document decomposition time
appears on the trailer sheet that prints at the end of a job. You
use numbers and predefined characters to indicate the format.
The predefined characters are replaced by the actual numbers
on the trailer sheet when the document is printed. The
predefined characters are as follows:
%g
Indicates that numbers appear as a string.
%<number>f
Indicates numbers appear with a floating point. For
example, "%3.2f" indicates you want the number to appear
as a three-digit floating-point number with two decimal
places, such as 2.10.
%<number>d
Indicates numbers appear as integers. For example, "%2d"
indicates you want the number to appear as a two-digit
integer, such as 32.
RoyalBlueHighlight <RGB value for royal blue>
Refers to the RGB value for royal blue highlight color. The
default setting is "R: 0.074, G: 0.0, B: 0.878".
For royal blue highlight color to print correctly, the default RGB
value for this option should not be modified.
RubyHighlight <RGB value for ruby>
Refers to the RGB value for ruby highlight color. The default
setting is "R: 0.878, G: 0.0, B: 0.3".
For ruby highlight color to print correctly, the default RGB value
for this option should not be modified.
SiteFontSize <font size in points>
Refers to the size of font you want to use for text that appears on
the header page. The default setting is 18 points.
SiteHeader <message>
Refers to any one line message you want to appear on the upper
right corner of the header page. The message may contain
approximately 40 to 60 characters using the default
SiteFontSize (18 pt text). Anything over that length will be
truncated starting at the beginning of the text string. If the default
SiteFontSize is changed, the number of characters displayed
will change accordingly.
SETTING SYSTEM DEFAULTS
5-15